Payment & Shipping Terms:
|Temperature Of Media::||-20℃ ~ +800℃||Pressure::||High Pressure, Class 150-Class 1500|
|Media::||Gas,oil,water,sour,highly Saline,corrosion||Port Size::||DN 15-DN 250(NPS1/2 - NPS10)|
|Structure::||Ball||Valve Type::||China Good-value Metal Seal Floating Ball Valve|
|Ball::||ASTM A182-F316H+CCC||Certificate::||ISO9001:2015,CE ,WRAS,API,OHSAS18001:2007|
Parameter level editing
1. Nominal pressure or pressure level: pn1.0-32.0 MPa, ANSI CLASS 150-900, jis10-20k;
2. Nominal diameter or caliber: DN6 ~ 900, NPS 1/4 ~ 36;
3, connection: flange, butt welding, thread, socket welding, etc.
4. Applicable temperature: -196℃ ~ 540℃;
5. Driving mode: manual, worm wheel and worm drive, pneumatic, electric, hydraulic, gas-liquid linkage, electro-hydraulic linkage;
6, body material: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, CF8(304), CF3(304L), CF8M(316), CF3M (316L), Ti.Choose different materials, suitable for water, steam, oil, nitric acid, acetic acid, oxidation medium, urea and other media.
Pressure limit editing
The nameplate shows the maximum operating pressure allowed by the ball valve at maximum and minimum operating temperatures.
Seat and seals made of PTFE or RTFE and operating temperatures for other types of seat and seals shall be subject to KI factory inspection.
Valve nominal pressure class (PN), can indicate the valve at normal temperature under the maximum working pressure.(for example: PN4.0, indicating a maximum working pressure of 40 Bar(4.0MPa) at -190c ~ 380C).
For electric or pneumatic actuators, please refer to the corresponding instructions.
Failure to solve
Ball valve has been scour by material for a long time, causing friction, causing serious impact wear, can not meet the normal production, at the same time caused the shortening of the use period of equipment.At present, wear-resistant materials, such as ceramic materials and polymer composite materials, are mostly used for ball valve wear.The polymer material has superior adhesion and super wear resistance, which can safely solve the problem of metal wear and ensure the normal production of enterprise equipment.Moreover, the unique ceramic material and special surface strengthening agent in the material make its wear-resisting and physical impact resistance better than any steel or even ceramic tile in the worst dry grinding environment. The product's incompatibility with coal is an ideal material to prevent coal accumulation.
Install and use
1. Indoor device or outdoor application with protective mode;
2. Outdoor outdoor devices, erosion by wind, sand, rain and sunshine;
3. Flammable or explosive gas or dust environment;
4. Environment in hot and humid zone and dry tropics;
5. Medium temperature of the pipeline is up to 450℃;
6. Ambient temperature below -20℃;
7. Prone to flooding or flooding;
8. Environment with radioactive material (nuclear power plant and radioactive material test facility);
9. The environment on the ship or in the dock (salt spray, mold, damp);
10. Occasions with severe vibration;Situations prone to fire;
For the electric ball valve in the above environment, its electric device structure, material and protection mode are different.Therefore, the corresponding valve electric device should be selected according to the above obligation environment.According to engineering control requirements, the control function of electric ball valve is completed by electric device.The purpose of using electric ball valve is to open, close and adjust the valve linkage to complete non-artificial electrical control or computer control.Electric devices are no longer just for thrift.Because the function and quality of the products of different manufacturers are different, therefore, the selection of electric devices and the selection of the valve is equally important to the project.As the level of industrial automation requirements always improve, on the one hand, the use of electric valves more and more, on the other hand, the control requirements of electric valves are also increasingly high, more and more complex.So electric valves in the electrical control design is always updated.With the increasing requirements and the popularity of computers, new and diverse electrical control methods will always appear.To the electric valve overall control consideration, should pay attention to choose the electric valve control mode.For example, according to engineering needs, whether to apply centralized control mode, or single control mode, whether to link with other equipment, sequence control or computer sequence control, etc., the control principle is not the same.The valve electric device manufacturer's sample only gives the standard electric control principle, therefore the application department should carry on the technical disclosure with the electric device consumption factory, clear the technical requirements.
Q1: How long is the delivery time?
A1: Generally it's 5-10 days we have stock. Or it's 15-90 days depend on different product and quantity.
Q2: What about the payment term?
A2: T/T 30% deposit, balance payment after finished production before shipment. Or as discussed.
Q3: Can I have a sample order?
A3: Yes, we agree sample order, mixed different models is also acceptable.
Q4: What's your MOQ?
A4: We can support 1 pc order. Welcome you to check our quality.
Q5: What's your quality inspection? Do you test all your goods before delivery?
A5: Yes, 100% test. It integrates R&D, casting, production, processing, painting, assembly, testing, sales and after-sales service, and strict quality requirements, according to GB, ASME, API, DIN standard, and we have gained ISO9001;2008, CE, and TUV certification.
Q6: Could I customize special request valve or new design products?
A6: We have own R&D team and more than 70 researchers and engineers. Can give you the best support on quality management and techniques, meet your different needs.
Q7: How does your factory do regarding quality control?
A7: Quality is priority. Valve always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001;2008, CE, TUV, authentication.
Contact Person: Han